Bentley S III Coupe 6.2 AT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 1962 - 1965. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Bentley S III Coupe 6.2 AT
1962 - 1965
| Engine capacity, cm³ 6,223 | - |
| Power 200 hp | Drive rear |
| Gearbox type automatic | Acceleration (0-100 km / h) 13 sec. |
| Engine's type petrol | - |
| add to compare | |
| General information | |
|---|---|
| Car brand | Bentley |
| Model | S |
| Generation | III |
| Modification | 6.2 AT |
| Country brand | United Kingdom |
| Body type | Coupe |
| Number of doors | 2 |
| Number of seats | 4 |
| Dimensions | |
| Length, mm | 5,350 |
| Width, mm | 1,829 |
| Height, mm | 1,588 |
| Wheelbase, mm | 3,226 |
| Weight and volume | |
| Transmission | |
| Gearbox type | automatic |
| Number of gears | 4 |
| Drive | rear |
| Performance | |
| Maximum speed | 182 km/h |
| Acceleration (0-100 km / h) | 13 sec. |
| Engine | |
| Engine's type | petrol |
| Power system | carburetor |
| Boost type | no |
| Engine capacity, cm³ | 6,223 |
| Power | 200 hp |
| Power, kWt) | 147 |
| Torque | 450 Nm |
| When rpm | 4500 |
| Location of cylinders | v-shaped |
| Number of cylinders | 8 |
| Number of valves per cylinder | 2 |
| Bore and stroke | 104.1 × 91.4 mm |
| Compression ratio | 8 |
| Suspension and brakes | |
| Type front suspension | independent, spring |
| Rear suspension | dependent (spring) |
| Front brakes | drum |
| Rear brakes | drum |
