Bugatti Chiron I Coupe Standart 8.0 AMT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 2016 - Today. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Bugatti Chiron I Coupe Standart 8.0 AMT
2016 - Today
| Engine capacity, cm³ 7,993 | - |
| Power 1500 hp | Drive four wheel drive |
| Gearbox type robot | Acceleration (0-100 km / h) 2.5 sec. |
| Engine's type petrol | - |
| add to compare | |
| General information | |
|---|---|
| Car brand | Bugatti |
| Model | Chiron |
| Generation | I |
| Modification | Standart 8.0 AMT |
| Country brand | France |
| Vehicle class | S |
| Body type | Coupe |
| Number of doors | 2 |
| Number of seats | 2 |
| Dimensions | |
| Length, mm | 4,544 |
| Width, mm | 2,038 |
| Height, mm | 1,212 |
| Wheelbase, mm | 2,711 |
| Ground clearance, mm | 110 |
| The size of tires | 285/30/R20 355/25/R21 |
| Weight and volume | |
| Trunk volume minimum, l. | - |
| Maximum amount of trunk, l. | - |
| Transmission | |
| Gearbox type | robot |
| Number of gears | 7 |
| Drive | four wheel drive |
| Performance | |
| Maximum speed | 420 km/h |
| Acceleration (0-100 km / h) | 2.5 sec. |
| Engine | |
| Engine's type | petrol |
| Engine Location | rear |
| Power system | distributed injection (multi-point) |
| Boost type | turbocharging |
| Engine capacity, cm³ | 7,993 |
| Power | 1500 hp |
| Power, kWt) | 900 |
| Torque | 1600 Nm |
| When rpm | — |
| Location of cylinders | w-shaped |
| Number of cylinders | 16 |
| Number of valves per cylinder | 4 |
| Bore and stroke | - mm |
| Suspension and brakes | |
| Type front suspension | independent, spring |
| Rear suspension | independent, spring |
| Front brakes | ventilated disc |
| Rear brakes | ventilated disc |
