Chrysler Cordoba I Coupe 6.6 AT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 1975 - 1979. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Chrysler Cordoba I Coupe 6.6 AT
1975 - 1979
| Engine capacity, cm³ 6,600 | - |
| Power 190 hp | Drive rear |
| Gearbox type automatic | - |
| Engine's type petrol | - |
| add to compare | |
| General information | |
|---|---|
| Car brand | Chrysler |
| Model | Cordoba |
| Generation | I |
| Modification | 6.6 AT |
| Country brand | USA |
| Vehicle class | S |
| Body type | Coupe |
| Number of doors | 2 |
| Number of seats | 4 |
| Dimensions | |
| Length, mm | 5,469 |
| Width, mm | 1,958 |
| Height, mm | 1,336 |
| Wheelbase, mm | 2,921 |
| Front track, mm | 1,571 |
| Rear track, mm | 1,574 |
| Ground clearance, mm | 132 |
| Weight and volume | |
| Weight, kg | 1664 |
| Trunk volume minimum, l. | - |
| Maximum amount of trunk, l. | - |
| The fuel tank, l. | 80 |
| Transmission | |
| Gearbox type | automatic |
| Number of gears | 3 |
| Drive | rear |
| Performance | |
| Engine | |
| Engine's type | petrol |
| Engine Location | front longitudinal |
| Power system | carburetor |
| Engine capacity, cm³ | 6,600 |
| Power | 190 hp |
| Power, kWt) | 142 |
| Torque | 305 Nm |
| When rpm | 3600 |
| Location of cylinders | v-shaped |
| Number of cylinders | 8 |
| Number of valves per cylinder | 2 |
| Bore and stroke | - mm |
| Compression ratio | 8.2 |
| Suspension and brakes | |
| Type front suspension | independent, spring |
| Front brakes | disc |
