Chrysler Dynasty I Sedan 3.3 AT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 1988 - 1993. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Chrysler Dynasty I Sedan 3.3 AT
1988 - 1993
| Engine capacity, cm³ 3,301 | Fuel Type 95 |
| Power 163 hp | Drive front |
| Gearbox type automatic | - |
| Engine's type petrol | Average fuel consumption per 100 km 11.6 l. |
| add to compare | |
| General information | |
|---|---|
| Car brand | Chrysler |
| Model | Dynasty |
| Generation | I |
| Modification | 3.3 AT |
| Country brand | USA |
| Vehicle class | D |
| Body type | Sedan |
| Number of doors | 4 |
| Number of seats | 5 |
| Dimensions | |
| Length, mm | 4,877 |
| Width, mm | 1,740 |
| Height, mm | 1,359 |
| Wheelbase, mm | 2,649 |
| Ground clearance, mm | 127 |
| Weight and volume | |
| Transmission | |
| Gearbox type | automatic |
| Number of gears | 4 |
| Drive | front |
| Performance | |
| Maximum speed | 195 km/h |
| Average fuel consumption per 100 km | 11.6 l. |
| Fuel Type | 95 |
| Engine | |
| Engine's type | petrol |
| Power system | central injection (single injection or a single-point) |
| Boost type | no |
| Engine capacity, cm³ | 3,301 |
| Power | 163 hp |
| Power, kWt) | 120 |
| Torque | 245 Nm |
| When rpm | 5300 |
| Location of cylinders | v-shaped |
| Number of cylinders | 6 |
| Number of valves per cylinder | 2 |
| Bore and stroke | 93 × 81 mm |
| Compression ratio | 8.9 |
| Suspension and brakes | |
| Type front suspension | independent, spring |
| Rear suspension | dependent, spring |
| Front brakes | disc |
| Rear brakes | drum |
