- Calculators /
- Car Calculator /
- Chrysler /
- Chrysler Imperial /
- Chrysler Imperial LeBaron Coupe hardtop /
- 6.8 AT
Chrysler Imperial LeBaron Coupe hardtop 6.8 AT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 1957 - 1975. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Chrysler Imperial LeBaron Coupe hardtop 6.8 AT
1957 - 1975
| Engine capacity, cm³ 6,771 | - |
| Power 350 hp | Drive rear |
| Gearbox type automatic | Acceleration (0-100 km / h) 9.5 sec. |
| Engine's type petrol | Average fuel consumption per 100 km 24.5 l. |
| add to compare | |
| General information | |
|---|---|
| Car brand | Chrysler |
| Model | Imperial |
| Generation | LeBaron |
| Modification | 6.8 AT |
| Country brand | USA |
| Vehicle class | F |
| Body type | coupe hardtop |
| Number of doors | 2 |
| Number of seats | 5 |
| Dimensions | |
| Length, mm | 5,834 |
| Width, mm | 2,012 |
| Height, mm | 1,400 |
| Wheelbase, mm | 3,226 |
| Front track, mm | 1,585 |
| Rear track, mm | 1,552 |
| Weight and volume | |
| Trunk volume minimum, l. | - |
| Maximum amount of trunk, l. | - |
| The fuel tank, l. | 87 |
| Transmission | |
| Gearbox type | automatic |
| Number of gears | 3 |
| Drive | rear |
| Performance | |
| Maximum speed | 197 km/h |
| Acceleration (0-100 km / h) | 9.5 sec. |
| Fuel consumption in the city 100 km | 30.8 l. |
| Fuel consumption on the highway at 100 km | 17.3 l. |
| Average fuel consumption per 100 km | 24.5 l. |
| Engine | |
| Engine's type | petrol |
| Engine Location | front longitudinal |
| Power system | carburetor |
| Boost type | no |
| Engine capacity, cm³ | 6,771 |
| Power | 350 hp |
| Power, kWt) | 257 |
| Torque | 637 Nm |
| When rpm | 4600 |
| Location of cylinders | v-shaped |
| Number of cylinders | 8 |
| Number of valves per cylinder | 2 |
| Bore and stroke | 106.365 × 95.25 mm |
| Compression ratio | 10.1 |
| Suspension and brakes | |
| Type front suspension | independent, torsion |
| Rear suspension | dependent (spring) |
| Front brakes | ventilated disc |
| Rear brakes | drum |
