- Calculators /
- Car Calculator /
- Chrysler /
- Chrysler Imperial /
- Chrysler Imperial LeBaron Coupe hardtop /
- 7.2 AT
Chrysler Imperial LeBaron Coupe hardtop 7.2 AT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 1957 - 1975. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Chrysler Imperial LeBaron Coupe hardtop 7.2 AT
1957 - 1975
Engine capacity, cm³ 7,206 | - |
Power 355 hp | Drive rear |
Gearbox type automatic | Acceleration (0-100 km / h) 9.6 sec. |
Engine's type petrol | Average fuel consumption per 100 km 25.4 l. |
add to compare |
General information | |
---|---|
Car brand | Chrysler |
Model | Imperial |
Generation | LeBaron |
Modification | 7.2 AT |
Country brand | USA |
Vehicle class | F |
Body type | coupe hardtop |
Number of doors | 2 |
Number of seats | 5 |
Dimensions | |
Length, mm | 5,834 |
Width, mm | 2,012 |
Height, mm | 1,400 |
Wheelbase, mm | 3,226 |
Front track, mm | 1,585 |
Rear track, mm | 1,552 |
Ground clearance, mm | 109 |
Weight and volume | |
Weight, kg | 2260 |
Trunk volume minimum, l. | - |
Maximum amount of trunk, l. | - |
The fuel tank, l. | 91 |
Transmission | |
Gearbox type | automatic |
Number of gears | 3 |
Drive | rear |
Performance | |
Maximum speed | 198 km/h |
Acceleration (0-100 km / h) | 9.6 sec. |
Fuel consumption in the city 100 km | 32 l. |
Fuel consumption on the highway at 100 km | 17.9 l. |
Average fuel consumption per 100 km | 25.4 l. |
Engine | |
Engine's type | petrol |
Engine Location | front longitudinal |
Power system | carburetor |
Boost type | no |
Engine capacity, cm³ | 7,206 |
Power | 355 hp |
Power, kWt) | 261 |
Torque | 651 Nm |
When rpm | 4400 |
Location of cylinders | v-shaped |
Number of cylinders | 8 |
Number of valves per cylinder | 2 |
Bore and stroke | 109.7 × 95.25 mm |
Compression ratio | 10.1 |
Suspension and brakes | |
Type front suspension | independent, torsion |
Rear suspension | dependent (spring) |
Front brakes | ventilated disc |
Rear brakes | drum |