- Calculators /
- Car Calculator /
- Chrysler /
- Chrysler Imperial Crown /
- Chrysler Imperial Crown V Coupe hardtop /
- 7.2 AT
Chrysler Imperial Crown V Coupe hardtop 7.2 AT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 1974 - 1975. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Chrysler Imperial Crown V Coupe hardtop 7.2 AT
1974 - 1975
| Engine capacity, cm³ 7,206 | - |
| Power 230 hp | Drive rear |
| Gearbox type automatic | Acceleration (0-100 km / h) 11.1 sec. |
| Engine's type petrol | Average fuel consumption per 100 km 25 l. |
| add to compare | |
| General information | |
|---|---|
| Car brand | Chrysler |
| Model | Imperial Crown |
| Generation | V |
| Modification | 7.2 AT |
| Country brand | USA |
| Vehicle class | S |
| Body type | coupe hardtop |
| Number of doors | 2 |
| Number of seats | 4 |
| Dimensions | |
| Length, mm | 5,870 |
| Width, mm | 2,024 |
| Height, mm | 1,389 |
| Wheelbase, mm | 3,150 |
| Ground clearance, mm | 168 |
| Weight and volume | |
| Weight, kg | 2250 |
| Curb Weight, kg | 2406 |
| Trunk volume minimum, l. | - |
| Maximum amount of trunk, l. | - |
| The fuel tank, l. | 94 |
| Transmission | |
| Gearbox type | automatic |
| Number of gears | 3 |
| Drive | rear |
| Performance | |
| Maximum speed | 189 km/h |
| Acceleration (0-100 km / h) | 11.1 sec. |
| Fuel consumption in the city 100 km | 31 l. |
| Fuel consumption on the highway at 100 km | 17.9 l. |
| Average fuel consumption per 100 km | 25 l. |
| Engine | |
| Engine's type | petrol |
| Engine Location | front longitudinal |
| Power system | carburetor |
| Engine capacity, cm³ | 7,206 |
| Power | 230 hp |
| Power, kWt) | 169 |
| Torque | 475 Nm |
| When rpm | 4000 |
| Location of cylinders | v-shaped |
| Number of cylinders | 8 |
| Number of valves per cylinder | 2 |
| Bore and stroke | 109.7 × 95.2 mm |
| Compression ratio | 8.2 |
| Suspension and brakes | |
| Type front suspension | independent, torsion |
| Rear suspension | dependent (spring) |
| Front brakes | disc |
| Rear brakes | disc |
