Chrysler Sebring III Sedan 2.4 AT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 2006 - 2010. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Chrysler Sebring III Sedan 2.4 AT
2006 - 2010
| Engine capacity, cm³ 2,429 | Fuel Type 92 |
| Power 172 hp | Drive front |
| Gearbox type automatic | - |
| Engine's type petrol | - |
| add to compare | |
| General information | |
|---|---|
| Car brand | Chrysler |
| Model | Sebring |
| Generation | III |
| Modification | 2.4 AT |
| Country brand | USA |
| Vehicle class | D |
| Body type | Sedan |
| Number of doors | 4 |
| Number of seats | 5 |
| Dimensions | |
| Length, mm | 4,850 |
| Width, mm | 1,843 |
| Height, mm | 1,497 |
| Wheelbase, mm | 2,765 |
| Front track, mm | 1,570 |
| Rear track, mm | 1,570 |
| Ground clearance, mm | 140 |
| The size of tires | 215/55/R18 |
| Weight and volume | |
| Curb Weight, kg | 2040 |
| Trunk volume minimum, l. | 441 |
| Maximum amount of trunk, l. | 441 |
| The fuel tank, l. | 64 |
| Transmission | |
| Gearbox type | automatic |
| Number of gears | 4 |
| Drive | front |
| Performance | |
| Environmental standard | Euro 5 |
| Fuel Type | 92 |
| Engine | |
| Engine's type | petrol |
| Engine Location | front cross- |
| Power system | distributed injection (multi-point) |
| Boost type | no |
| Engine capacity, cm³ | 2,429 |
| Power | 172 hp |
| Power, kWt) | 127 |
| Torque | 222 Nm |
| When rpm | 5200 |
| Location of cylinders | inline |
| Number of cylinders | 4 |
| Number of valves per cylinder | 4 |
| Bore and stroke | 87.5 × 101 mm |
| Compression ratio | 9.4 |
| Suspension and brakes | |
| Type front suspension | independent, spring |
| Rear suspension | independent, spring |
| Front brakes | ventilated disc |
| Rear brakes | disc |
