- Calculators /
- Car Calculator /
- Chrysler /
- Chrysler Town & Country /
- Chrysler Town & Country (1941–1988) Cabriolet /
- 5.3 MT
Chrysler Town & Country (1941–1988) Cabriolet 5.3 MT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 1941 - 1988. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Chrysler Town & Country (1941–1988) Cabriolet 5.3 MT
1941 - 1988
Engine capacity, cm³ 5,302 | - |
Power 136 hp | Drive rear |
Gearbox type mechanics | Acceleration (0-100 km / h) 24.9 sec. |
Engine's type petrol | Average fuel consumption per 100 km 19.9 l. |
add to compare |
General information | |
---|---|
Car brand | Chrysler |
Model | Town & Country |
Generation | 1941–1988 |
Modification | 5.3 MT |
Country brand | USA |
Vehicle class | S |
Body type | Cabriolet |
Number of doors | 2 |
Number of seats | 4 |
Dimensions | |
Length, mm | 5,512 |
Width, mm | 1,905 |
Height, mm | 1,727 |
Wheelbase, mm | 3,086 |
Front track, mm | 1,473 |
Rear track, mm | 1,575 |
Ground clearance, mm | 200 |
Weight and volume | |
Weight, kg | 2091 |
Curb Weight, kg | 2540 |
Trunk volume minimum, l. | - |
Maximum amount of trunk, l. | - |
The fuel tank, l. | 76 |
Transmission | |
Gearbox type | mechanics |
Number of gears | 4 |
Drive | rear |
Performance | |
Maximum speed | 138 km/h |
Acceleration (0-100 km / h) | 24.9 sec. |
Fuel consumption in the city 100 km | 27.8 l. |
Fuel consumption on the highway at 100 km | 15.1 l. |
Average fuel consumption per 100 km | 19.9 l. |
Engine | |
Engine's type | petrol |
Engine Location | front longitudinal |
Power system | carburetor |
Boost type | no |
Engine capacity, cm³ | 5,302 |
Power | 136 hp |
Power, kWt) | 100 |
Torque | 366 Nm |
When rpm | 3200 |
Location of cylinders | inline |
Number of cylinders | 8 |
Number of valves per cylinder | 2 |
Bore and stroke | 82.5 × 123.8 mm |
Compression ratio | 6.7 |
Suspension and brakes | |
Type front suspension | independent, spring |
Rear suspension | dependent (spring) |
Front brakes | drum |
Rear brakes | drum |