Chrysler Vision I Sedan 3.5 AT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 1992 - 1997. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Chrysler Vision I Sedan 3.5 AT
1992 - 1997
| Engine capacity, cm³ 3,518 | - |
| Power 211 hp | Drive front |
| Gearbox type automatic | Acceleration (0-100 km / h) 9.5 sec. |
| Engine's type petrol | Average fuel consumption per 100 km 12.4 l. |
| add to compare | |
| General information | |
|---|---|
| Car brand | Chrysler |
| Model | Vision |
| Generation | I |
| Modification | 3.5 AT |
| Country brand | USA |
| Vehicle class | E |
| Body type | Sedan |
| Number of doors | 4 |
| Number of seats | 5 |
| Dimensions | |
| Length, mm | 5,121 |
| Width, mm | 1,890 |
| Height, mm | 1,434 |
| Wheelbase, mm | 2,873 |
| Front track, mm | 1,574 |
| Rear track, mm | 1,574 |
| Weight and volume | |
| Weight, kg | 1615 |
| Curb Weight, kg | 2100 |
| Trunk volume minimum, l. | 473 |
| Maximum amount of trunk, l. | 473 |
| The fuel tank, l. | 68 |
| Transmission | |
| Gearbox type | automatic |
| Number of gears | 4 |
| Drive | front |
| Performance | |
| Maximum speed | 214 km/h |
| Acceleration (0-100 km / h) | 9.5 sec. |
| Average fuel consumption per 100 km | 12.4 l. |
| Engine | |
| Engine's type | petrol |
| Engine Location | front longitudinal |
| Power system | distributed injection (multi-point) |
| Boost type | no |
| Engine capacity, cm³ | 3,518 |
| Power | 211 hp |
| Power, kWt) | 155 |
| Torque | 288 Nm |
| When rpm | 5850 |
| Location of cylinders | v-shaped |
| Number of cylinders | 6 |
| Number of valves per cylinder | 4 |
| Compression ratio | 10.4 |
| Suspension and brakes | |
| Type front suspension | independent, spring |
| Front brakes | ventilated disc |
| Rear brakes | ventilated disc |
