Dodge Charger II Coupe hardtop 7.0 MT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 1968 - 1970. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Dodge Charger II Coupe hardtop 7.0 MT
1968 - 1970
Engine capacity, cm³ 6,974 | - |
Power 425 hp | Drive rear |
Gearbox type mechanics | Acceleration (0-100 km / h) 5.1 sec. |
Engine's type petrol | Average fuel consumption per 100 km 29.6 l. |
add to compare |
General information | |
---|---|
Car brand | Dodge |
Model | Charger |
Generation | II |
Modification | 7.0 MT |
Country brand | USA |
Vehicle class | S |
Body type | coupe hardtop |
Number of doors | 2 |
Number of seats | 5 |
Dimensions | |
Length, mm | 5,283 |
Width, mm | 1,948 |
Height, mm | 1,351 |
Wheelbase, mm | 2,972 |
Weight and volume | |
Weight, kg | 1805 |
Trunk volume minimum, l. | - |
Maximum amount of trunk, l. | - |
Transmission | |
Gearbox type | mechanics |
Number of gears | 4 |
Drive | rear |
Performance | |
Maximum speed | 211 km/h |
Acceleration (0-100 km / h) | 5.1 sec. |
Fuel consumption in the city 100 km | 35.4 l. |
Fuel consumption on the highway at 100 km | 25.1 l. |
Average fuel consumption per 100 km | 29.6 l. |
Engine | |
Engine's type | petrol |
Engine Location | front longitudinal |
Power system | carburetor |
Boost type | no |
Engine capacity, cm³ | 6,974 |
Power | 425 hp |
Power, kWt) | 317 |
Torque | 664 Nm |
When rpm | 5000 |
Location of cylinders | v-shaped |
Number of cylinders | 8 |
Number of valves per cylinder | 2 |
Bore and stroke | 107.95 × 95.25 mm |
Compression ratio | 10.25 |
Suspension and brakes | |
Type front suspension | independent, spring |
Rear suspension | dependent (spring) |
Front brakes | drum |
Rear brakes | drum |