- Calculators /
- Car Calculator /
- Dodge /
- Dodge Custom Royal /
- Dodge Custom Royal I Coupe hardtop /
- 4.4 MT
Dodge Custom Royal I Coupe hardtop 4.4 MT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 1955 - 1956. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Dodge Custom Royal I Coupe hardtop 4.4 MT
1955 - 1956
| Engine capacity, cm³ 4,418 | - |
| Power 183 hp | Drive rear |
| Gearbox type mechanics | Acceleration (0-100 km / h) 12.7 sec. |
| Engine's type petrol | Average fuel consumption per 100 km 14.9 l. |
| add to compare | |
| General information | |
|---|---|
| Car brand | Dodge |
| Model | Custom Royal |
| Generation | I |
| Modification | 4.4 MT |
| Country brand | USA |
| Vehicle class | S |
| Body type | coupe hardtop |
| Number of doors | 2 |
| Number of seats | 5 |
| Dimensions | |
| Length, mm | 5,387 |
| Width, mm | 1,829 |
| Height, mm | 1,539 |
| Wheelbase, mm | 3,048 |
| Front track, mm | 1,496 |
| Rear track, mm | 1,501 |
| Ground clearance, mm | 127 |
| Weight and volume | |
| Weight, kg | 1670 |
| Trunk volume minimum, l. | - |
| Maximum amount of trunk, l. | - |
| The fuel tank, l. | 64 |
| Transmission | |
| Gearbox type | mechanics |
| Number of gears | 4 |
| Drive | rear |
| Performance | |
| Maximum speed | 166 km/h |
| Acceleration (0-100 km / h) | 12.7 sec. |
| Fuel consumption in the city 100 km | 17.5 l. |
| Fuel consumption on the highway at 100 km | 13.9 l. |
| Average fuel consumption per 100 km | 14.9 l. |
| Engine | |
| Engine's type | petrol |
| Engine Location | front longitudinal |
| Power system | carburetor |
| Boost type | no |
| Engine capacity, cm³ | 4,418 |
| Power | 183 hp |
| Power, kWt) | 137 |
| Torque | 332 Nm |
| When rpm | 4400 |
| Location of cylinders | v-shaped |
| Number of cylinders | 8 |
| Number of valves per cylinder | 2 |
| Bore and stroke | 92.202 × 82.702 mm |
| Compression ratio | 7.6 |
| Suspension and brakes | |
| Type front suspension | independent, spring |
| Rear suspension | dependent (spring) |
| Front brakes | drum |
| Rear brakes | drum |
