Dodge Custom Royal II Sedan 5.7 MT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 1957 - 1959. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Dodge Custom Royal II Sedan 5.7 MT
1957 - 1959
Engine capacity, cm³ 5,736 | Fuel Type 92 |
Power 299 hp | Drive rear |
Gearbox type mechanics | Acceleration (0-100 km / h) 8.4 sec. |
Engine's type petrol | Average fuel consumption per 100 km 20 l. |
add to compare |
General information | |
---|---|
Car brand | Dodge |
Model | Custom Royal |
Generation | II |
Modification | 5.7 MT |
Country brand | USA |
Vehicle class | E |
Body type | Sedan |
Number of doors | 4 |
Number of seats | 5 |
Dimensions | |
Length, mm | 5,522 |
Width, mm | 2,032 |
Height, mm | 1,448 |
Wheelbase, mm | 3,099 |
Ground clearance, mm | 137 |
Weight and volume | |
Weight, kg | 1730 |
Trunk volume minimum, l. | - |
Maximum amount of trunk, l. | - |
The fuel tank, l. | 76 |
Transmission | |
Gearbox type | mechanics |
Number of gears | 3 |
Drive | rear |
Performance | |
Maximum speed | 196 km/h |
Acceleration (0-100 km / h) | 8.4 sec. |
Fuel consumption in the city 100 km | 23.6 l. |
Fuel consumption on the highway at 100 km | 17.9 l. |
Average fuel consumption per 100 km | 20 l. |
Fuel Type | 92 |
Engine | |
Engine's type | petrol |
Engine Location | front longitudinal |
Power system | carburetor |
Boost type | no |
Engine capacity, cm³ | 5,736 |
Power | 299 hp |
Power, kWt) | 220 |
Torque | 522 Nm |
When rpm | 4600 |
Location of cylinders | v-shaped |
Number of cylinders | 8 |
Number of valves per cylinder | 2 |
Bore and stroke | 103.2 × 85.7 mm |
Compression ratio | 10 |
Suspension and brakes | |
Type front suspension | independent, spring |
Rear suspension | dependent (spring) |
Front brakes | drum |
Rear brakes | drum |