- Calculators /
- Car Calculator /
- Dodge /
- Dodge Custom Royal /
- Dodge Custom Royal II Sedan hardtop /
- 5.9 MT
Dodge Custom Royal II Sedan hardtop 5.9 MT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 1957 - 1959. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Dodge Custom Royal II Sedan hardtop 5.9 MT
1957 - 1959
| Engine capacity, cm³ 5,913 | Fuel Type 92 |
| Power 324 hp | Drive rear |
| Gearbox type mechanics | Acceleration (0-100 km / h) 8.3 sec. |
| Engine's type petrol | Average fuel consumption per 100 km 22.8 l. |
| add to compare | |
| General information | |
|---|---|
| Car brand | Dodge |
| Model | Custom Royal |
| Generation | II |
| Modification | 5.9 MT |
| Country brand | USA |
| Vehicle class | E |
| Body type | hardtop sedan |
| Number of doors | 4 |
| Number of seats | 5 |
| Dimensions | |
| Length, mm | 5,522 |
| Width, mm | 2,032 |
| Height, mm | 1,448 |
| Wheelbase, mm | 3,099 |
| Ground clearance, mm | 137 |
| Weight and volume | |
| Weight, kg | 1810 |
| Trunk volume minimum, l. | - |
| Maximum amount of trunk, l. | - |
| The fuel tank, l. | 76 |
| Transmission | |
| Gearbox type | mechanics |
| Number of gears | 3 |
| Drive | rear |
| Performance | |
| Maximum speed | 202 km/h |
| Acceleration (0-100 km / h) | 8.3 sec. |
| Fuel consumption in the city 100 km | 27 l. |
| Fuel consumption on the highway at 100 km | 20.3 l. |
| Average fuel consumption per 100 km | 22.8 l. |
| Fuel Type | 92 |
| Engine | |
| Engine's type | petrol |
| Engine Location | front longitudinal |
| Power system | carburetor |
| Boost type | no |
| Engine capacity, cm³ | 5,913 |
| Power | 324 hp |
| Power, kWt) | 238 |
| Torque | 542 Nm |
| When rpm | 4800 |
| Location of cylinders | v-shaped |
| Number of cylinders | 8 |
| Number of valves per cylinder | 2 |
| Bore and stroke | 104.8 × 85.7 mm |
| Compression ratio | 10 |
| Suspension and brakes | |
| Type front suspension | independent, spring |
| Rear suspension | dependent (spring) |
| Front brakes | drum |
| Rear brakes | drum |
