1. Calculators
  2.   /  
  3. Car Calculator
  4.   /  
  5. Ford
  6.   /  
  7. Ford Ranger
  8.   /  
  9. Ford Ranger III Double cab pick-up
  10.   /  
  11. XLT 2.2 MT

Ford Ranger III Double cab pick-up XLT 2.2 MT — specifications, acceleration to 100 km / h, fuel consumption

This model comes with 2011 - 2015. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Ford Ranger III Double cab pick-up XLT 2.2 MT 2011 - 2015
Engine capacity, cm³ 2,198 Fuel Type Diesel fuel
Power 150 hp Drive four wheel drive
Gearbox type mechanics Acceleration (0-100 km / h) 12.3 sec.
Engine's type diesel Average fuel consumption per 100 km 8.5 l.
add to compare
General information
Car brand Ford
Model Ranger
Generation III
Modification XLT 2.2 MT
Country brand USA
Vehicle class J
Body type Double cab pick-up
Number of doors 4
Number of seats 5
Assessment of safety 5
Title rating EuroNCAP
Dimensions
Length, mm 5,359
Width, mm 1,850
Height, mm 1,815
Wheelbase, mm 3,220
Front track, mm 1,560
Rear track, mm 1,560
Ground clearance, mm 229
The size of tires 255/70/R16
265/65/R17
265/60/R18
Weight and volume
Weight, kg 2048
Curb Weight, kg 3200
Trunk volume minimum, l. 1210
Maximum amount of trunk, l. 1210
The fuel tank, l. 80
Transmission
Gearbox type mechanics
Number of gears 6
Drive four wheel drive
Performance
Maximum speed 175 km/h
Acceleration (0-100 km / h) 12.3 sec.
Fuel consumption in the city 100 km 10.1 l.
Fuel consumption on the highway at 100 km 7.7 l.
Average fuel consumption per 100 km 8.5 l.
Environmental standard Euro 5
Fuel Type Diesel fuel
CO2 Emissions, g / km 224
Engine
Engine's type diesel
Engine Location front longitudinal
Power system engine with undivided combustion chamber (direct injection)
Boost type turbocharging
Engine capacity, cm³ 2,198
Power 150 hp
Power, kWt) 110
Torque 375 Nm
When rpm 3700
Location of cylinders inline
Number of cylinders 4
Number of valves per cylinder 4
Bore and stroke 86 × 94.6 mm
Compression ratio 15.7
Suspension and brakes
Type front suspension independent, spring
Rear suspension dependent (spring)
Front brakes ventilated disc
Rear brakes drum
Select language čeština dansk Deutsch English español français italiano Nederlands norsk polski português suomalainen tiếng Việt Türk български Русский العربية ไทย 日本人
Undo