Holden Vectra I Sedan 2.0 AT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 1998 - 2001. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Holden Vectra I Sedan 2.0 AT
1998 - 2001
| Engine capacity, cm³ 1,998 | Fuel Type 95 |
| Power 136 hp | Drive front |
| Gearbox type automatic | - |
| Engine's type petrol | - |
| add to compare | |
| General information | |
|---|---|
| Car brand | Holden |
| Model | Vectra |
| Generation | I |
| Modification | 2.0 AT |
| Country brand | Australia |
| Vehicle class | D |
| Body type | Sedan |
| Number of doors | 4 |
| Number of seats | 5 |
| Dimensions | |
| Length, mm | 4,477 |
| Width, mm | 1,707 |
| Height, mm | 1,428 |
| Wheelbase, mm | 2,640 |
| Front track, mm | 1,484 |
| Rear track, mm | 1,470 |
| Ground clearance, mm | 140 |
| The size of tires | 195/65/R15 |
| Weight and volume | |
| Weight, kg | 1340 |
| Curb Weight, kg | 1860 |
| Trunk volume minimum, l. | 500 |
| Maximum amount of trunk, l. | 500 |
| The fuel tank, l. | 60 |
| Transmission | |
| Gearbox type | automatic |
| Number of gears | 4 |
| Drive | front |
| Performance | |
| Fuel Type | 95 |
| Engine | |
| Engine's type | petrol |
| Engine Location | front cross- |
| Power system | distributed injection (multi-point) |
| Boost type | no |
| Engine capacity, cm³ | 1,998 |
| Power | 136 hp |
| Power, kWt) | 100 |
| Torque | 188 Nm |
| When rpm | 5600 |
| Location of cylinders | inline |
| Number of cylinders | 4 |
| Number of valves per cylinder | 4 |
| Bore and stroke | 86 × 86 mm |
| Compression ratio | 10.8 |
| Suspension and brakes | |
| Type front suspension | independent, spring |
| Rear suspension | semi-independent, spring |
| Front brakes | ventilated disc |
| Rear brakes | disc |
Holden model
models
