Isuzu Bellett I Sedan 1.5 AT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 1963 - 1973. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Isuzu Bellett I Sedan 1.5 AT
1963 - 1973
| Engine capacity, cm³ 1,471 | - |
| Power 68 hp | Drive rear |
| Gearbox type automatic | - |
| Engine's type petrol | - |
| add to compare | |
| General information | |
|---|---|
| Car brand | Isuzu |
| Model | Bellett |
| Generation | I |
| Modification | 1.5 AT |
| Country brand | Japan |
| Vehicle class | C |
| Body type | Sedan |
| Number of doors | 4 |
| Number of seats | 5 |
| Dimensions | |
| Length, mm | 3,995 |
| Width, mm | 1,495 |
| Height, mm | 1,390 |
| Wheelbase, mm | 2,350 |
| Front track, mm | 1,220 |
| Rear track, mm | 1,195 |
| Ground clearance, mm | 205 |
| Weight and volume | |
| Weight, kg | 950 |
| Curb Weight, kg | 1225 |
| The fuel tank, l. | 40 |
| Transmission | |
| Gearbox type | automatic |
| Number of gears | 2 |
| Drive | rear |
| Performance | |
| Maximum speed | 135 km/h |
| Engine | |
| Engine's type | petrol |
| Engine Location | front longitudinal |
| Power system | carburetor |
| Boost type | no |
| Engine capacity, cm³ | 1,471 |
| Power | 68 hp |
| Power, kWt) | 50 |
| Torque | 111 Nm |
| When rpm | 5000 |
| Location of cylinders | inline |
| Number of cylinders | 4 |
| Number of valves per cylinder | 2 |
| Bore and stroke | 79 × 75 mm |
| Compression ratio | 8.5 |
| Suspension and brakes | |
| Type front suspension | independent, spring |
| Rear suspension | independent, spring |
| Front brakes | drum |
| Rear brakes | drum |
