Lancia Y10 I 3 doors Hatchback 1.1 MT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 1985 - 1995. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Lancia Y10 I 3 doors Hatchback 1.1 MT
1985 - 1995
Engine capacity, cm³ 1,108 | Fuel Type 95 |
Power 51 hp | Drive front |
Gearbox type mechanics | - |
Engine's type petrol | - |
add to compare |
General information | |
---|---|
Car brand | Lancia |
Model | Y10 |
Generation | I |
Modification | 1.1 MT |
Country brand | Italy |
Vehicle class | A |
Body type | Hatchback dd 3 |
Number of doors | 3 |
Number of seats | 5 |
Dimensions | |
Length, mm | 3,390 |
Width, mm | 1,510 |
Height, mm | 1,420 |
Wheelbase, mm | 2,159 |
Front track, mm | 1,280 |
Rear track, mm | 1,280 |
Ground clearance, mm | 160 |
Weight and volume | |
Trunk volume minimum, l. | 195 |
Maximum amount of trunk, l. | 830 |
The fuel tank, l. | 43 |
Transmission | |
Gearbox type | mechanics |
Number of gears | 5 |
Drive | front |
Performance | |
Maximum speed | 150 km/h |
Fuel Type | 95 |
Engine | |
Engine's type | petrol |
Engine Location | front cross- |
Power system | central injection (single injection or a single-point) |
Boost type | no |
Engine capacity, cm³ | 1,108 |
Power | 51 hp |
Power, kWt) | 38 |
Torque | 85 Nm |
When rpm | 5250 |
Location of cylinders | inline |
Number of cylinders | 4 |
Number of valves per cylinder | 2 |
Bore and stroke | 70 × 72 mm |
Compression ratio | 9.6 |
Suspension and brakes | |
Type front suspension | independent, spring |
Rear suspension | semi-independent, spring |
Front brakes | disc |
Rear brakes | drum |