Mazda 6 II (GH) Facelift Liftbek 2.5 AT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 2009 - 2013. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Mazda 6 II (GH) Facelift Liftbek 2.5 AT
2009 - 2013
| Engine capacity, cm³ 2,488 | Fuel Type 95 |
| Power 170 hp | Drive front |
| Gearbox type automatic | Acceleration (0-100 km / h) 9.8 sec. |
| Engine's type petrol | Average fuel consumption per 100 km 8.4 l. |
| add to compare | |
| General information | |
|---|---|
| Car brand | Mazda |
| Model | 6 |
| Generation | II GH |
| Modification | 2.5 AT |
| Country brand | Japan |
| Vehicle class | D |
| Body type | Liftbek |
| Number of doors | 5 |
| Number of seats | 5 |
| Dimensions | |
| Length, mm | 4,755 |
| Width, mm | 1,795 |
| Height, mm | 1,440 |
| Wheelbase, mm | 2,725 |
| Front track, mm | 1,570 |
| Rear track, mm | 1,560 |
| Ground clearance, mm | 165 |
| The size of tires | 225/45/R18 |
| Weight and volume | |
| Weight, kg | 1410 |
| Curb Weight, kg | 1985 |
| Trunk volume minimum, l. | 510 |
| Maximum amount of trunk, l. | 1702 |
| The fuel tank, l. | 64 |
| Transmission | |
| Gearbox type | automatic |
| Number of gears | 5 |
| Drive | front |
| Performance | |
| Maximum speed | 209 km/h |
| Acceleration (0-100 km / h) | 9.8 sec. |
| Fuel consumption in the city 100 km | 11.8 l. |
| Fuel consumption on the highway at 100 km | 6.4 l. |
| Average fuel consumption per 100 km | 8.4 l. |
| Environmental standard | Euro 5 |
| Fuel Type | 95 |
| CO2 Emissions, g / km | 194 |
| Engine | |
| Engine's type | petrol |
| Engine Location | front cross- |
| Power system | distributed injection (multi-point) |
| Boost type | no |
| Engine capacity, cm³ | 2,488 |
| Power | 170 hp |
| Power, kWt) | 125 |
| Torque | 226 Nm |
| When rpm | 6000 |
| Location of cylinders | inline |
| Number of cylinders | 4 |
| Number of valves per cylinder | 4 |
| Bore and stroke | 89 × 100 mm |
| Compression ratio | 9.7 |
| Suspension and brakes | |
| Type front suspension | independent, spring |
| Rear suspension | independent, spring |
| Front brakes | ventilated disc |
| Rear brakes | disc |
Mazda model
22 models
