Mercury Milan I Sedan 3.0 AT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 2005 - 2010. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Mercury Milan I Sedan 3.0 AT
2005 - 2010
Engine capacity, cm³ 2,967 | Fuel Type 92 |
Power 212 hp | Drive front |
Gearbox type automatic | Acceleration (0-100 km / h) 7.3 sec. |
Engine's type petrol | - |
add to compare |
General information | |
---|---|
Car brand | Mercury |
Model | Milan |
Generation | I |
Modification | 3.0 AT |
Country brand | USA |
Vehicle class | E |
Body type | Sedan |
Number of doors | 4 |
Number of seats | 5 |
Dimensions | |
Length, mm | 4,863 |
Width, mm | 1,864 |
Height, mm | 1,417 |
Wheelbase, mm | 2,728 |
Front track, mm | 1,565 |
Rear track, mm | 1,557 |
Ground clearance, mm | 150 |
The size of tires | 205/50/R16 |
Weight and volume | |
Weight, kg | 1535 |
Trunk volume minimum, l. | 442 |
Maximum amount of trunk, l. | 442 |
The fuel tank, l. | 68 |
Transmission | |
Gearbox type | automatic |
Number of gears | 6 |
Drive | front |
Performance | |
Maximum speed | 188 km/h |
Acceleration (0-100 km / h) | 7.3 sec. |
Fuel consumption in the city 100 km | 11.2 l. |
Fuel consumption on the highway at 100 km | 8.1 l. |
Fuel Type | 92 |
Engine | |
Engine's type | petrol |
Engine Location | front cross- |
Power system | distributed injection (multi-point) |
Boost type | no |
Engine capacity, cm³ | 2,967 |
Power | 212 hp |
Power, kWt) | 156 |
Torque | 271 Nm |
When rpm | 6250 |
Location of cylinders | inline |
Number of cylinders | 6 |
Number of valves per cylinder | 4 |
Bore and stroke | 89 × 79.5 mm |
Compression ratio | 10 |
Suspension and brakes | |
Type front suspension | independent, spring |
Rear suspension | independent, spring |
Front brakes | disc |
Rear brakes | disc |
Mercury model
models