1. Calculators
  2.   /  
  3. Car Calculator
  4.   /  
  5. Opel
  6.   /  
  7. Opel Insignia
  8.   /  
  9. Opel Insignia II Facelift Liftbek
  10.   /  
  11. 2.0 AT

Opel Insignia II Facelift Liftbek 2.0 AT — specifications, acceleration to 100 km / h, fuel consumption

This model comes with 2020 - Today. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Opel Insignia II Facelift Liftbek 2.0 AT 2020 - Today
Engine capacity, cm³ 1,998 Fuel Type 95
Power 200 hp Drive front
Gearbox type automatic Acceleration (0-100 km / h) 7.7 sec.
Engine's type petrol Average fuel consumption per 100 km 6.4 l.
add to compare
General information
Car brand Opel
Model Insignia
Generation II
Modification 2.0 AT
Country brand Germany
Vehicle class D
Body type Liftbek
Number of doors 5
Number of seats 5
Dimensions
Length, mm 4,897
Width, mm 1,863
Height, mm 1,455
Wheelbase, mm 2,829
Front track, mm 1,607
Rear track, mm 1,610
Ground clearance, mm 160
The size of tires 215/55/R17
225/55/R17
245/45/R18
245/35/R20
Weight and volume
Weight, kg 1595
Curb Weight, kg 2160
Trunk volume minimum, l. 490
Maximum amount of trunk, l. 1450
The fuel tank, l. 62
Transmission
Gearbox type automatic
Number of gears 9
Drive front
Performance
Maximum speed 235 km/h
Acceleration (0-100 km / h) 7.7 sec.
Fuel consumption in the city 100 km 8.8 l.
Fuel consumption on the highway at 100 km 5 l.
Average fuel consumption per 100 km 6.4 l.
Environmental standard Euro 6
Fuel Type 95
CO2 Emissions, g / km 146
Engine
Engine's type petrol
Engine Location front cross-
Power system direct injection (direct)
Boost type turbocharging
Engine capacity, cm³ 1,998
Power 200 hp
Power, kWt) 147
Torque 350 Nm
When rpm 4250–6000
Location of cylinders inline
Number of cylinders 4
Number of valves per cylinder 4
Bore and stroke 83 × 90.2 mm
Compression ratio 10
Suspension and brakes
Type front suspension independent, spring
Rear suspension independent, spring
Front brakes ventilated disc
Rear brakes disc
Select language čeština dansk Deutsch English español français italiano Nederlands norsk polski português suomalainen tiếng Việt Türk български Русский العربية ไทย 日本人
Undo