Plymouth Barracuda I Coupe 2.8 MT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 1964 - 1974. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
Plymouth Barracuda I Coupe 2.8 MT
1964 - 1974
| Engine capacity, cm³ 2,793 | - |
| Power 102 hp | Drive rear |
| Gearbox type mechanics | - |
| Engine's type petrol | - |
| add to compare | |
| General information | |
|---|---|
| Car brand | Plymouth |
| Model | Barracuda |
| Generation | I |
| Modification | 2.8 MT |
| Country brand | USA |
| Body type | Coupe |
| Number of doors | 2 |
| Number of seats | 4 |
| Dimensions | |
| Length, mm | 4,740 |
| Width, mm | 1,902 |
| Height, mm | 1,293 |
| Wheelbase, mm | 2,743 |
| Front track, mm | 1,516 |
| Rear track, mm | 1,565 |
| Weight and volume | |
| Transmission | |
| Gearbox type | mechanics |
| Number of gears | 4 |
| Drive | rear |
| Performance | |
| Maximum speed | 153 km/h |
| Engine | |
| Engine's type | petrol |
| Power system | carburetor |
| Boost type | no |
| Engine capacity, cm³ | 2,793 |
| Power | 102 hp |
| Power, kWt) | 75 |
| Torque | 210 Nm |
| When rpm | 4400 |
| Location of cylinders | inline |
| Number of cylinders | 6 |
| Number of valves per cylinder | 2 |
| Bore and stroke | 86.4 × 79.4 mm |
| Compression ratio | 8.5 |
| Suspension and brakes | |
| Type front suspension | independent, spring |
| Rear suspension | dependent (spring) |
| Front brakes | drum |
| Rear brakes | drum |
Plymouth model
models
