SEAT Toledo IV Liftbek 1.2 MT — specifications, acceleration to 100 km / h, fuel consumption
This model comes with 2012 - 2019. See information on the technical characteristics of this modification below, fuel consumption, acceleration to 100 km / h (acceleration to hundreds), as well as fuel consumption and maximum speed.
You can not add more than 3 modifications!
Compare cars
Your comparison table is empty!
SEAT Toledo IV Liftbek 1.2 MT
2012 - 2019
| Engine capacity, cm³ 1,197 | Fuel Type 95 |
| Power 90 hp | Drive front |
| Gearbox type mechanics | Acceleration (0-100 km / h) 11.3 sec. |
| Engine's type petrol | Average fuel consumption per 100 km 4.7 l. |
| add to compare | |
| General information | |
|---|---|
| Car brand | SEAT |
| Model | Toledo |
| Generation | IV |
| Modification | 1.2 MT |
| Country brand | Spain |
| Vehicle class | B |
| Body type | Liftbek |
| Number of doors | 5 |
| Number of seats | 5 |
| Assessment of safety | 5 |
| Title rating | EuroNCAP |
| Dimensions | |
| Length, mm | 4,482 |
| Width, mm | 1,706 |
| Height, mm | 1,461 |
| Wheelbase, mm | 2,602 |
| Front track, mm | 1,463 |
| Rear track, mm | 1,500 |
| Ground clearance, mm | 150 |
| The size of tires | 185/60/R15 |
| Weight and volume | |
| Weight, kg | 1156 |
| Curb Weight, kg | 1616 |
| Trunk volume minimum, l. | 550 |
| Maximum amount of trunk, l. | 550 |
| The fuel tank, l. | 55 |
| Transmission | |
| Gearbox type | mechanics |
| Number of gears | 5 |
| Drive | front |
| Performance | |
| Maximum speed | 186 km/h |
| Acceleration (0-100 km / h) | 11.3 sec. |
| Fuel consumption in the city 100 km | 6.2 l. |
| Fuel consumption on the highway at 100 km | 3.8 l. |
| Average fuel consumption per 100 km | 4.7 l. |
| Environmental standard | Euro 6 |
| Fuel Type | 95 |
| CO2 Emissions, g / km | 112 |
| Engine | |
| Engine's type | petrol |
| Engine Location | front cross- |
| Power system | direct injection (direct) |
| Boost type | turbocharging |
| Engine capacity, cm³ | 1,197 |
| Power | 90 hp |
| Power, kWt) | 66 |
| Torque | 160 Nm |
| When rpm | 4400–5400 |
| Location of cylinders | inline |
| Number of cylinders | 4 |
| Number of valves per cylinder | 4 |
| Bore and stroke | 71 × 75.6 mm |
| Compression ratio | 10.5 |
| Suspension and brakes | |
| Type front suspension | independent, spring |
| Rear suspension | semi-independent, spring |
| Front brakes | disc |
| Rear brakes | disc |
